Zebra Technologies ZT400 manual 104

104

Printer Configuration and Adjustment

User Menus—NETWORK Menu

WLAN IP ADDRESS

▼ 000.000.000.000 ▲

NEXT

Set the Printer’s IP Address*

View and, if necessary, change the printer’s IP address.

Changes are saved only if WIRED IP PROTOCOL on page 103 is set to PERMANENT. To allow any saved changes to take effect, use RESET NETWORK on page 106 to reset the print server.

See IP Address on page 77 for more information.

*This menu item appears only if a wireless print server is installed in your printer.

WLAN SUBNET MASK

▼ 000.000.000.000 ▲

NEXT

Set the Subnet Mask*

View and, if necessary, change the subnet mask.

Changes are saved only if WIRED IP PROTOCOL on page 103 is set to PERMANENT. To allow any saved changes to take effect, use RESET NETWORK on page 106 to reset the print server.

See Subnet Mask on page 77 for more information.

*This menu item appears only if a wireless print server is installed in your printer.

WLAN GATEWAY

▼ 000.000.000.000 ▲

NEXT

Set the Default Gateway*

View and, if necessary, change the default gateway.

Changes are saved only if WIRED IP PROTOCOL on page 103 is set to PERMANENT. To allow any saved changes to take effect, use RESET NETWORK on page 106 to reset the print server.

See Gateway on page 77 for more information.

*This menu item appears only if a wireless print server is installed in your printer.

WLAN IP PROTOCOL

▼ all▲

Set the IP Resolution Method*

This parameter tells if the user (permanent) or the server (dynamic) selects the IP address. When a dynamic option is chosen, this parameter tells the method(s) by which the wired or wireless print server receives the IP address from the server.

See IP Protocol on page 78 for more information.

*This menu item appears only if a wireless print server is installed in your printer.

P1066582-002 ZT400 Series™ User Guide 4/8/14