Zebra Technologies ZT400 Rfid.reader1.power.read, Rfid.reader1.power.write, Rfid.tag.calibrate

82

Printer Configuration and Adjustment

Adjust Printer Settings

Table 4 • RFID Settings (Continued)

RFID Read	If the desired read power is not achieved through RFID tag calibration, a value may be
Power	specified.
	Accepted values:	0 to 30
	Related ZPL command(s):	^RW
	SGD command used:	rfid.reader_1.power.read
	User menu item:	RFID READ POWER on page 109
	Printer web page:	View and Modify Printer Settings > RFID Setup >
		RFID READ PWR
RFID Write	If the desired write power is not achieved through RFID tag calibration, a value may be
Power	specified.
	Accepted values:	0 to 30
	Related ZPL command(s):	^RW
	SGD command used:	rfid.reader_1.power.write
	User menu item:	RFID WRITE POWER on page 109
	Printer web page:	View and Modify Printer Settings > RFID Setup >
		RFID WRITE PWR
RFID Valid	Resets the RFID valid label counter to zero.
Counter
	Accepted values:	N/A
	Related ZPL command(s):	~RO
	SGD command used:	odometer.rfid.valid_resettable
	User menu item:	RFID VALID COUNT on page 110
	Printer web page:	N/A
RFID Void	Resets the RFID void label counter to zero.
Counter
	Accepted values:	N/A
	Related ZPL command(s):	~RO
	SGD command used:	odometer.rfid.void_resettable
	User menu item:	RFID VOID COUNT on page 110
	Printer web page:	N/A
RFID Tag	Initiate tag calibration for RFID media. (Not the same as media and ribbon calibration.)
Calibration
	Accepted values:	N/A
	Related ZPL command(s):	^HR
	SGD command used:	rfid.tag.calibrate
	User menu item:	RFID CALIBRATE on page 108
	Printer web page:	N/A

P1066582-002 ZT400 Series™ User Guide 4/8/14