Zebra Technologies ZT400 manual Media Specifications, 176, Varies for each transponder type

176

Specifications

Media Specifications

Media Specifications

Model			ZT410	ZT420
Label length	Minimum	Non-RFID
		Tear-off	0.5 in. (12.7 mm)	0.5 in. (12.7 mm)
		Peel-off	0.5 in (12.7 mm)	0.5 in (12.7 mm)
		Rewind	0.5 in. (12.7 mm)	0.5 in. (12.7 mm)
		Cutter	1.0 in. (25.4 mm)	1.0 in. (25.4 mm)
		RFID	Varies for each transponder type
	Maximum	200 or 300 dpi	39 in. (991 mm)	39 in. (991 mm)
		600 dpi	20 in. (508 mm)	N/A
Maximum continuous media print		200 dpi	157 in. (3988 mm)	102 in. (2590 mm)
length
		300 dpi	73 in. (1854 mm)	45 in. (1143 mm)
		600 dpi	39 in. (991 mm)	N/A
Label width	Minimum	Non-RFID	1.0 in. (25.4 mm)	2 in. (51 mm)
		RFID	Varies for each transponder type
	Maximum	Tear/Cutter	4.5 in. (114 mm)	7.0 in. (178 mm)
		Peel/Rewind	4.25 in. (108 mm)	6.75 in. (171 mm)
Total thickness		Minimum	0.0023 in.	0.0023 in.
(includes liner, if any)			(0.058 mm)	(0.058 mm)
		Maximum	0.010 in. (0.25 mm)
Maximum roll outside diameter			8 in. (203 mm)
			on a 3-in. (76-mm) inside diameter core
Inter-label gap		Minimum	0.079 in. (2 mm)
		Preferred	0.118 in. (3 mm)
		Maximum	0.157 in. (4 mm)
Ticket/tag notch size (width x length)			0.25 in. x 0.12 in.
			(6 mm x 3 mm)
Hole diameter			0.125 in. (3.18 mm)
Notch or hole position (centered from		Minimum	0.15 in. (3.8 mm)
inner media edge)
		Maximum	2.25 in. (57 mm)	3.5 in. (90 mm)
Density, in Optical Density Units (ODU) (black mark)			> 1.0 ODU
Maximum media density			≤ 0.5 ODU
Transmissive media sensor (fixed position)			7/16 in. (11 mm) from inside edge

P1066582-002 ZT400 Series™ User Guide 4/8/14