Zebra Technologies ZT400 manual Rfid Menu, 108

108

Printer Configuration and Adjustment

User Menus—RFID Menu

RFID Menu

Items in this menu are shown in the order in which they appear when you press the RIGHT ARROW. For more information about these settings, see Table 4, RFID Settings on page 80.

RFID COUNTRY CODE

▼ NOT SELECTED ▲

Select the RFID Country Code

Select the RFID country code (if applicable).

Note • A prompt for the country code appears only on some printers the first time that they are powered up, depending on the world region to which the printers were shipped. Specify the appropriate country to access the printer’s RFID features.

RFID STATUS

RFID OK

RFID CALIBRATE

START

View the RFID Status

This parameter displays the status of the RFID subsystem of the printer. During an error condition, an error message displays.

See RFID Status on page 80 for more information.

Perform RFID Tag Calibration

Initiate tag calibration for RFID media.

See RFID Tag Calibration on page 82 for more information.

READ RFID DATA

▼ EPC▲

12345ABC12345ABC124

5ABC

READ

Read and Display the RFID Tag Data

When this option is selected, the reader attempts to read the specified information from an RFID tag, even if the printhead is open. No printer movement occurs while tag data is being read.

If you wish to read and display the information stored in an RFID tag:

1.Position the RFID label with its transponder over the RFID antenna.

2.Use the UP ARROW or DOWN ARROW to select the type of information that you want read and displayed.

3.Press RIGHT SELECT to select READ.

The results of the test are shown on the display.

See Read RFID Data on page 80 for more information.

P1066582-002 ZT400 Series™ User Guide 4/8/14