Zebra Technologies ZT400 manual Command Char on, Control Char on, Delimiter Char on

84

Printer Configuration and Adjustment

Adjust Printer Settings

Table 5 • Language Settings (Continued)

Command The format command prefix is a two-digit hex value used as a parameter place marker in

Character ZPL/ZPL II format instructions. The printer looks for this hex character to indicate the start of a ZPL/ZPL II format instruction.

Set the format command character to match what is used in your label formats.

Important • You cannot use the same hex value for the format command prefix, control character, and delimiter characters. The printer must see different characters to work properly. If you are setting the value through the control panel, the printer will skip any value that is already in use.

	Accepted values:	00 to FF
	Related ZPL command(s):	^CC or ~CC
	SGD command used:	zpl.caret
	User menu item:	COMMAND CHAR on page 111
	Printer web page:	View and Modify Printer Settings > ZPL Control
Control	The printer looks for this two-digit hex character to indicate the start of a ZPL/ZPL II
Character	control instruction.
	Set the control prefix character to match what is used in your label formats.
	Accepted values:	00 to FF
	Related ZPL command(s):	^CT or ~CT
	SGD command used:	zpl.control_character
	User menu item:	CONTROL CHAR on page 111
	Printer web page:	View and Modify Printer Settings > ZPL Control
Delimiter	The delimiter character is a two-digit hex value used as a parameter place marker in
Character	ZPL/ZPL II format instructions.
	Set the delimiter character to match what is used in your label formats.
	Accepted values:	00 to FF
	Related ZPL command(s):	^CD or ~CD
	SGD command used:	zpl.delimiter
	User menu item:	DELIMITER CHAR on page 112
	Printer web page:	View and Modify Printer Settings > ZPL Control

P1066582-002 ZT400 Series™ User Guide 4/8/14