Mitsubishi Electronics 838 SERIES manual 64 5 NetCommand IR Control, About NetCommand IR Control

64 5 NetCommand IR Control

About NetCommand IR Control

•NetCommand IR home-theater control is avail- able on 838 series TVs.

•IR emitter cables are available for purchase from Mitsubishi. Visit www.mitsuparts.com or call

800-553-7278 and request one of the following: -- 242D483020 (two-ended cable)

-- 299P254020 (four-ended cable).

•NetCommand setup is optional.

•You can perform NetCommand setup for a device any time after the TV has detected the device.

•NetCommand operates by sending remote control signals from the TV to your other devices via the

IR (infrared) emitters, telling the devices to play, record, change inputs, adjust volume, change chan- nels, or perform other functions. All this is accom- plished with the TV’s remote control left in TV mode.

•You may wish to use NetCommand IR control to supplement control of CEC-enabled devices.

Important Note on NetCommand

Be sure to connect the IR emitter cable to the TV and properly place the emitters so that NetCommand can control your devices.

For assistance call 1(800) 332-2119