Mitsubishi Electronics 838 SERIES Supplemental Audio Connections, continued, HDMI cable, Rca/Rca

2. TV Connections 27

Supplemental Audio Connections, continued

Using the TV Speakers as a Center Channel

If using an external surround sound system, you can make the TV’s speakers provide center channel sound. Your A/V receiver must have a center channel pre out that can supply an amplified center-channel signal to the TV.

1.Connect your A/V receiver’s HDMI output and center channel pre out to the TV as shown.

		CENTER	SUB
			WOOFER
		INPUT	OUTPUT
			DIGITAL	AUDIO/SURROUND	DVI/PC AUDIO			ANT
			AUDIO	R OUTPUT L	R	INPUT L
			OUTPUT
		IR-NetCommand
		Output/EXTERNAL
		CONTROLLER INPUT
				Y/ VIDEO	Pb	Pr	2	3D
	HDMI						INPUT
			LAN					GLASSES
1	2	3						EMITTER
							1
							CENTER
				Y/ VIDEO	Pb	Pr	INPUTPUTI
			R AUDIO	L	(480i / 480p / 720p / 1080i)

HDMI cable	RCA/RCA
	audio cable

A/V receiver with HDMI

output
		CENTER
Surround sound	HDMI OUT	CHANNEL
source device		PRE OUT

4.Enable the TV’s center channel mode:

a.Go to Sound > Global and set Center Channel to On.

b.Press the AUDIO key and press to display

the TV Speakers option. Press to select Center.

5.To balance volume:

a.Power on the A/V receiver and TV.

b.Compare the volume of the TV’s center channel with the rest of the sound system. If the TV volume needs adjustment,

i.Turn on the TV speakers. Press AUDIO and

press to display the TV Speakers option. Press to select On.

ii.Adjust TV volume using the VOL key.

iii.Return the TV to center channel mode.

Press AUDIO and press to display the

TV Speakers option. Press to select Center.

iv.Compare the sound volume. Repeat this adjustment if needed.

2.Turn on the A/V receiver’s center channel pre out if needed. See the A/V receiver’s instruction manual.

3.Press the VOL key to adjust TV volume to about level 30.

For assistance call 1(800) 332-2119