Zebra Technologies ZT400 manual 133

Routine Maintenance

Cleaning Schedule and Procedures

2.Caution • The printhead may be hot and could cause severe burns. Allow the printhead to cool.

Open the printhead assembly by rotating the printhead-open lever.

3.Remove the ribbon (if used) and the media.

4.Using the swab from a Zebra Preventive Maintenance Kit, wipe along the brown strip on the printhead assembly from end to end. In place of the Preventive Maintenance Kit, you may use a clean swab dipped in a solution of isopropyl alcohol (minimum 90%) and deionized water (maximum 10%). Allow the solvent to evaporate.

133

4/8/14 ZT400 Series™ User Guide P1066582-002