Printer Configuration and Adjustment

Adjust Printer Settings

67

Print Settings

 

Table 1 • Print Settings

 

 

Print

Set the darkness to the lowest setting that provides good print quality. If you set the darkness

Darkness

too high, the label image may print unclearly, bar codes may not scan correctly, the ribbon

 

may burn through, or the printhead may wear prematurely.

 

If desired, use the FEED Self Test on page 165 to determine the best darkness setting.

 

 

 

 

Accepted values:

 

0.0 – 30.0

 

 

 

 

 

Related ZPL command(s):

 

^MD, ~SD

 

 

 

 

 

SGD command used:

 

print.tone

 

 

 

 

 

User menu item:

 

DARKNESS on page 94

 

 

 

 

 

Printer web page:

 

View and Modify Printer Settings > General Setup >

 

 

 

Darkness

 

 

 

Print Speed

Select the speed for printing a label (given in inches per second). Slower print speeds

 

typically yield better print quality.

 

 

 

 

 

Accepted values:

 

2, 3, 4, 5, 6

 

 

 

 

 

Related ZPL command(s):

 

^PR

 

 

 

 

 

SGD command used:

 

media.speed

 

 

 

 

 

User menu item:

 

PRINT SPEED on page 94

 

 

 

 

 

Printer web page:

 

N/A

 

 

 

Media Type

Select the type of media that you are using.

If you select CONTINUOUS, you must include a label length in your label format (^LL if you are using ZPL).

If you select GAP/NOTCH or MARK for various non-continuous media, the printer feeds media to calculate the label length.

See Types of Media on page 16 for more information.

 

Accepted values:

CONTINUOUS

 

 

GAP/NOTCH

 

 

MARK

 

 

 

 

Related ZPL command(s):

^MN

 

 

 

 

SGD command used:

ezpl.media_type

 

 

 

 

User menu item:

MEDIA TYPE on page 94

 

 

 

 

Printer web page:

View and Modify Printer Settings > Media Setup >

 

 

 

Media Type

 

 

 

 

4/8/14

ZT400 Series™ User Guide

P1066582-002

Page 67
Image 67
Zebra Technologies ZT400 manual Print Settings, Md, ~Sd, Print.tone, Media.speed