the jack screws, remove the springs from the cutterhead. If you decide to use the springs, you can just thread the jack screws com- pletely into the cutterhead so they will not get lost. Replace the gib and knife.

6.Position the knife gauge over the knife as shown in Figure 53 and loosen the gib bolts until the knife is completely loose.

Figure 53. Jig placement on cutterhead.

7.Jack Screws—Using a 3MM allen wrench, find the jack screws through the access holes in the cutterhead (Figure 54) and rotate the jack screws to raise or lower the knife. When the knife is set correctly, it will barely touch the middle pad of the knife set- ting jig. Snug the gib bolts tight enough to just hold the knife in place. Repeat steps 5- 7 with the rest of the knives.

Figure 54. Jack screw access hole.

G0500/G1018/G1018HW 8" Jointers

Springs—Push the knife down with the jig so that the knife edge is touching the middle pad of the jig. Hold the jig down and tighten the gib bolts just tight enough to hold the knife in place. Repeat steps 5-7with the rest of the knives.

8.Rotate the cutterhead to the first knife you started with. Slightly tighten all the gib bolts, starting at the ends and working your way to the middle by alternating left and right. Repeat this step on the rest of the knives.

9.Repeat step 8.

10.Repeat step 8, but final tighten each gib bolt.

Adjusting Gibs

The function of the table gibs (shown in Figure 55) is to eliminate excessive play in the table movement. The gibs also control how easy it will be to move the tables up and down.

Figure 55. Table gibs.

To adjust the table gibs:

1.Loosen the table lock.

2.Loosen the lock nuts and setscrews shown in Figure 56 on the next page. Make sure you support the table as you loosen it to prevent it from dropping to the end of its travel.

-37-

Page 38 Page 40
Page 39
Image 39
Grizzly G1018HW instruction manual Adjusting Gibs, Table gibs To adjust the table gibs
Page 38 Page 40

G1018, G1018HW specifications

The Grizzly G1018HW and G1018 are compact, versatile woodworking machines designed for hobbyists and professionals alike. Known for their robust construction and user-friendly design, these models offer a multitude of features that cater to various woodworking needs.

At the heart of both models is a powerful motor that delivers consistent performance. The G1018HW, being the heavier variant, is built with enhanced durability in mind, making it ideal for users who demand a bit more from their machinery. It boasts an increased weight capacity, ensuring stability during operation, which is particularly beneficial for larger workpieces.

Both models come with an effective dust collection system, crucial for maintaining a clean and safe workspace. The integrated dust port connects easily to standard dust collection hoses, minimizing dust and debris during operation. This feature not only improves visibility but also contributes to overall health safety by reducing airborne particles.

The G1018 and G1018HW are equipped with precision-machined components, ensuring accuracy and reliability in cuts. The adjustable table height and tilt features provide versatility, allowing users to perform a range of operations, from jointing to planing. The intuitive controls and clear scale markings make it easy to set desired measurements without hassle.

Additionally, the machines are designed with portability in mind. Despite their solid build, they come with mobility features such as built-in wheels and handles, making it convenient to move them around the workshop or transport them to different job sites. The compact design fits well into smaller spaces without compromising on function.

Another notable characteristic is the availability of aftermarket accessories, which can enhance functionality further. Users can customize their G1018 models with additional attachments that increase their versatility, allowing them to tackle more complex tasks.

In summary, the Grizzly G1018HW and G1018 are exceptional additions to any woodworking setup. Their powerful motors, effective dust control systems, precision-engineered components, and user-friendly design set them apart in the realm of woodworking machines. Whether for a hobbyist or a seasoned professional, these models provide the practicality and reliability needed to produce high-quality results.
Top Page Image Contents