Zebra Technologies ZT400 manual Wlan.channel, Wlan.signalstrength, Device.reset

		Printer Configuration and Adjustment
		Adjust Printer Settings
	Table 3 • Network Settings (Continued)
Channel	View the wireless channel being used when the wireless network is active and
	authenticated.
	Accepted values:	N/A
	Related ZPL command(s):	none
	SGD command used:	wlan.channel
	User menu item:	CHANNEL on page 105
	Printer web page:	View and Modify Printer Settings >
		Network Communications Setup >
		Wireless Setup
Signal	View the wireless signal strength when the wireless network is active and authenticated.
	Accepted values:	N/A
	Related ZPL command(s):	none
	SGD command used:	wlan.signal_strength
	User menu item:	SIGNAL on page 105
	Printer web page:	View and Modify Printer Settings >
		Network Communications Setup >
		Wireless Setup
Reset Network	This option resets the wired or wireless print server. You must reset the print server to
	allow any changes to the network settings to take effect.
	Accepted values:	N/A
	Related ZPL command(s):	~WR
	SGD command used:	device.reset
	User menu item:	RESET NETWORK on page 106
	Printer web page:	Print Server Settings > Factory Print Server Settings

79

4/8/14 ZT400 Series™ User Guide P1066582-002