Lexmark C790 manual Configuration change, some held jobs were not restored, Input config error

57 Configuration change, some held jobs were not restored

Something has changed in the printer to invalidate the held jobs. Possible changes include:

•The printer firmware has been updated.

•Paper input options needed for the print job were removed.

•The print job was created using data from a device in the USB port and the device is no longer in the USB port.

•The printer hard disk contains print jobs that were stored while installed in a different printer model.

Touch Continue to clear the message.

58 Input config error

1Turn the printer off.

2Unplug the power cord from the wall outlet.

3Check if all tray configurations are correct. Remove unnecessary trays if needed.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.

58 Too many bins attached

1Turn the printer off.

2Unplug the power cord from the wall outlet.

3Remove the additional bins.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.

58 Too many disks installed

1Turn the printer off.

2Unplug the power cord from the wall outlet.

3Remove the excess disks.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.

58 Too many flash options installed

1Turn the printer off.

2Unplug the power cord from the wall outlet.

3Remove the excess flash memory.

Troubleshooting

186