Finishing menu
Menu item
Sides (Duplex)
1sided
2sided
Duplex Binding
Long Edge
Short Edge
Copies
Blank Pages
Do Not Print
Collate
Off (1,1,1,2,2,2)
On (1,2,1,2,1,2)
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Separator Source
Tray [x]
Manual Feeder
Description
Specifies whether duplex
Notes:
•1 sided is the factory default setting.
•You can set
Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page
Notes:
•Long Edge is the factory default setting. Long edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
•Short edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).
Specifies the default number of copies for each print job
Note: 1 is the factory default setting.
Specifies whether blank pages are inserted in a print job
Note: Do Not Print is the factory default setting.
Stacks the pages of a print job in sequence when printing multiple copies
Notes:
•Off is the factory default setting.
•On stacks the print job in sequence.
Specifies whether blank separator sheets are inserted
Notes:
•Off is the factory default setting.
•Between Copies inserts a blank sheet between each copy of a print job if Collate is set to On. If Collate is set to Off, then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
•Between Jobs inserts a blank sheet between print jobs.
•Between Pages inserts a blank sheet between each page of a print job. This setting is useful when printing transparencies or when inserting blank pages in a document.
Specifies the paper source for separator sheets
Notes:
•Tray 1 (standard tray) is the factory default setting.
•From the Paper menu, Configure MP must be set to Cassette for Manual Feeder to appear as a menu setting.
Understanding printer menus
