Lexmark C790 manual Network Card menu, TCP/IP menu, Network Reports

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > Reports or

Network Reports

Menu item

Print Setup Page

Description

Prints a report containing information about the network printer settings, such as the TCP/IP address

Network Card menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > Network Card

Menu item	Description
View Card Status	Lets you view the connection status of the Network Card
Connected
Disconnected
View Card Speed	Lets you view the speed of a currently active network card
Network Address	Lets you view the network addresses
UAA
LAA
Job Timeout	Sets the amount of time in seconds before a network print job is canceled
0	Note: 90 seconds is the factory default setting.
10–225
Banner Page	Allows the printer to print a banner page
Off	Note: Off is the factory default setting.
On

TCP/IP menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > TCP/IP

Note: This menu is available only in network models or printers attached to print servers.

Menu item

Activate

On

Off

Set Hostname

IP Address

Description

Activates TCP/IP

Note: On is the factory default setting.

Lets you set the current TCP/IP hostname

Note: This can be changed only from the Embedded Web Server.

Lets you view or change the current TCP/IP address

Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP.

Understanding printer menus

104