Lexmark C790 manual AppleTalk menu, Standard USB menu, Compatibility, Choose Network, Activate

Menu item

Compatibility

802.11b/g/n

802.11n

802.11b/g

Choose Network

[list of available networks]

View Signal Quality

View Security Mode

Description

Specifies the wireless standard for the wireless network Note: The 802.11b/g/n is the factory default setting.

Lets you select an available network for the printer to use

Lets you view the quality of the wireless connection

Lets you view the encryption method that a wireless network uses

Note: Wi-Fi Protected Setup (WPS) is a simple and secure configuration that allows you to establish a wireless network and enable network security without requiring prior knowledge of Wi-Fi technology. It is no longer necessary to configure the network name (SSID) and WEP key or WPA passphrase for network devices.

AppleTalk menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > AppleTalk

Menu item

Activate

Yes

No

View Name

View Address

Set Zone

[default]

[list of zones available on the network]

Description

Activates AppleTalk support

Note: Yes is the factory default setting.

Shows the assigned AppleTalk name

Note: The name can be changed only from the Embedded Web Server.

Shows the assigned AppleTalk address

Note: The address can be changed only from the Embedded Web Server.

Provides a list of AppleTalk zones available on the network

Note: When “default” is selected, the printer uses the AppleTalk zone that the router identifies as the default zone for the network. If no default zone exists, then the zone marked with an * is the default setting.

Standard USB menu

Menu item

PCL SmartSwitch

On

Off

Description

Sets the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language

Notes:

•On is the factory default setting.

•When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if the PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch is set to Off.

Understanding printer menus

107