![](/images/new-backgrounds/1105202/105202235x1.webp)
Menu item
Configure Log
Enable Audit No
Yes
Enable Remote Syslog No
Yes
Remote Syslog Facility
Severity of events to log
Description
Specifies whether and how audit logs are created
Notes:
•Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting.
•Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting.
•Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting.
•With the security audit log activated, the severity value of each event is recorded. 4 is the factory default setting.
Set Date and Time menu
Menu item
Current Date and Time
Manually Set Date and Time
[input date/time]
Time Zone
[list of time zones]
Automatically observe DST
On
Off
Enable NTP
On
Off
Description
Shows the current date and time settings for the printer
Notes:
•Date and Time is set in
•Manually setting the date and time sets Enable NTP to Off.
Note: GMT is the factory default setting.
Note: On is the factory default setting. This uses the applicable Daylight Saving Time associated with the Time Zone setting.
Enables Network Time Protocol, which synchronizes the clocks of devices on a network
Notes:
•On is the factory default setting.
•The setting is turned off if you manually set the date and time.
Understanding printer menus