Printing a network setup page
If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.
1From the home screen, navigate to:
> Reports > Network Setup Page
2Check the first section of the network setup page, and confirm that the status is Connected.
If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page.
Setting up the printer software
Installing the printer software
Note: If you installed the printer software on this computer before but need to reinstall the software, then uninstall the current software first.
For Windows users
1Close all open software programs.
2Insert the installation software CD.
If the installation dialog screen does not appear after a minute, then launch the CD manually: a Click 
, or click Start and then click Run.
b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive. c Press Enter, or click OK.
3Click Install, and then follow the instructions on the computer screen.
For Macintosh users
1Close all open applications.
2Insert the installation software CD.
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.
3
Using the Internet
1Go to the Lexmark Web site at www.lexmark.com.
2Navigate to:
SUPPORT & DOWNLOADS > select your printer > select your operating system
3Download the driver and install the printer software.
Note: Updated printer software may be available at http://support.lexmark.com.
Additional printer setup
44
