
Menu item
Timeouts
Wait Timeout
Disabled
Timeouts
Job Hold Timeout
Print Recovery
Auto Continue
Disabled
Print Recovery
Jam Recovery
Auto
On
Off
Print Recovery
Page Protect
Off
On
Description
Sets the amount of time (in seconds) the printer waits for additional data before canceling a print job
Notes:
•40 seconds is the factory default setting.
•Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL emulation print jobs.
Sets the amount of time (in seconds) the printer waits for user intervention before it holds jobs that require unavailable resources and continues to process other jobs in the print queue
Notes:
•30 seconds is the factory default setting.
•This menu appears only when a printer hard disk is installed.
Lets the printer automatically continue printing from certain offline situations when not resolved within the specified time period
Note: Disabled is the factory default setting.
Specifies whether the printer reprints jammed pages
Notes:
•Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
•On sets the printer to always reprint jammed pages.
•Off sets the printer to never reprint jammed pages.
Lets the printer successfully print a page that may not have printed otherwise
Notes:
•Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page.
•On sets the printer to process the whole page so the entire page prints.
Understanding printer menus