
Menu item
Network Buffer
Auto
3KB to [maximum size allowed]
Job Buffering
Off
On
Auto
Mac Binary PS
Auto
On
Off
Standard Network Setup
Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
Network [x] Setup
Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
Description
Sets the size of the network input buffer
Notes:
•Auto is the factory default setting.
•The value can be changed in
•The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
•To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel, serial, and USB buffers.
•Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Temporarily stores print jobs on the printer hard disk before printing. This menu only appears if a formatted disk is installed.
Notes:
•Off is the factory default setting.
•On buffers print jobs on the printer hard disk.
•Auto buffers print jobs only if the printer is busy processing data from another input port.
•Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
•Auto is the factory default setting.
•Off filters print jobs using the standard protocol.
•On processes raw binary PostScript print jobs.
Displays and sets the printer network settings.
Note: The Wireless menu appears only when the printer is connected to a wireless network.
Network Reports menu
This menu is available from the Network/Ports menu:
Understanding printer menus