Menu item
Paper Saver
Off
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver Border
None
Solid
Staple Job
Off
On
Hole Punch
Off
On
Hole Punch Mode
2holes
3holes
4holes
Offset Pages
None
Between Copies
Between Jobs
Description
Specifies that
Notes:
•Off is the factory default setting.
•The number selected is the number of page images that will print per side.
Specifies the positioning of
Notes:
•Horizontal is the factory default setting.
•Positioning depends on the number of page images and whether they are in portrait or landscape orientation.
Specifies the orientation of a
Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Prints a border on each page image
Note: None is the factory default setting.
Specifies whether prints are stapled
Note: This menu appears only when a stapler is installed.
Specifies whether prints have punched holes
Note: This menu appears only when a puncher is installed.
Determines the type of punch finishing performed on a print
Notes:
•3 holes is the US factory default setting. 4 holes is the international factory default setting.
•This menu appears only when a puncher is installed.
Offsets pages at certain instances
Notes:
•None is the factory default setting.
•Between Copies offsets each copy of a print job if Collate is set to On. If Collate is set to Off, then each set of printed pages are offset, such as all page 1's and all page 2's.
•Between Jobs sets the same offset position for the entire print job regardless of the number of copies printed.
•This menu appears only when a stapler is installed.
Understanding printer menus
