Lexmark C790 Network/Ports menu, Active NIC menu, Standard Network or Network x menus, NPA Mode

Network/Ports menu

Active NIC menu

Menu item

Active NIC

Auto

[list of available network cards]

Description

Notes:

•Auto is the factory default setting.

•This menu item appears only if an optional network card is installed.

Standard Network or Network [x] menus

Note: Only active ports appear in this menu; all inactive ports are omitted.

Menu item

PCL SmartSwitch

On

Off

PS SmartSwitch

On

Off

NPA Mode

Auto

Off

Description

Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language

Notes:

•On is the factory default setting.

•When Off is used, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language

Notes:

•On is the factory default setting.

•When Off is used, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

Notes:

•Auto is the factory default setting.

•Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Understanding printer menus

102