Lexmark C790 IPv6 menu, Netmask Gateway Enable DHCP, Enable RARP, Enable BOOTP, Enable AutoIP

Menu item

Netmask

Gateway

Enable DHCP

On

Off

Enable RARP

On

Off

Enable BOOTP

On

Off

Enable AutoIP

Yes

No

Enable FTP/TFTP

Yes

No

Enable HTTP Server

Yes

No

WINS Server Address

Enable DDNS

Yes

No

Enable mDNS

Yes

No

DNS Server Address

Enable HTTPS

Yes

No

Description

Lets you view or change the current TCP/IP netmask

Lets you view or change the current TCP/IP gateway

Specifies the DHCP address and parameter assignment setting

Note: On is the factory default setting.

Specifies the RARP address assignment setting

Note: On is the factory default setting.

Specifies the BOOTP address assignment setting

Note: On is the factory default setting.

Specifies the Zero Configuration Networking setting

Note: Yes is the factory default setting.

Enables the built-in FTP server, which allows you to send files to the printer using File Transfer Protocol.

Note: Yes is the factory default setting.

Enables the built-in web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a web browser.

Note: Yes is the factory default setting.

Lets you view or change the current WINS server address

Lets you view or change the current DDNS setting

Note: Yes is the factory default setting.

Lets you view or change the current mDNS setting

Note: Yes is the factory default setting.

Lets you view or change the current DNS server address

Lets you view or change the current HTTPS setting

Note: Yes is the factory default setting.

IPv6 menu

Note: This menu is available only in network models or in printers attached to print servers. This menu is available from the Network/Ports menu:

Understanding printer menus

105