Quick Reference
;CDC
Switches to changer operation (only if a changer is connected).
If there is no changer, the system will switch to AUX as long as AUX ON is switched on in the DSC menu.
<CD
Switches to CD operation
=TU (TUNER)
Switches to radio operation. Switches to the memory levels/wavebands FM I, FM II, TS (Travelstore), MW and LW.
>CD insert
When the CD is inserted with the label facing up, it will be automatically trans- ported into the operating position. The unit will automatically switch to CD play.
?Visual theft protection
The following conditions must be ful- filled before the light diode will flash as a visual indication of theft protection: The unit is switched off;
The operating panel is folded down; The KeyCard has been removed; The DSC menu settings is switched to LED ON (factory setting).
For more information, refer to “DSC programming, LED ON/OFF”.
@KeyCard theft protection system The KeyCard must be inserted before the unit can be operated.
KeyCard
Inserting the KeyCard
Press 1 to unlock the operating pan- el; it will fold down forwards.
Insert the KeyCard with the contact points facing down (see illustration). Lock the operating panel.
2
1
3
Perform these steps in the reverse or- der to remove the KeyCard.
Make sure to read the information in the section on “KeyCard theft protec- tion system”.
AEject
Press the CD eject button for approx. 2 seconds and the CD will eject.
For safety’s sake, the operating panel must remain locked when the vehicle is in motion.
When you leave the vehicle, un- lock the panel and remove the KeyCard to protect the equipment against theft.
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
47
