Blaupunkt SEATTLE RDM 169 operating instructions Scanning stored stations with Preset Scan

If “lo” is displayed, the radio will only pick up strong, local stations (low sensitivity).

Changing the scan time

The scan time can be set from between five to a maximum of 30 seconds.

Please refer to the section on “DSC pro- gramming - SCANTIME”.

Selecting the seek tuning sensi- tivity

You can alter the automatic seek tuning sensitivity.

If you do not select a station, the scan func- tion will automatically switch off after the fre- quency band has been run through com- pletely. The unit will tune into the station you were listening to before you started the scan function.

Radio operation with RDS (Radio Data System)

• by pressing ST1 - ST6.	To select a scanned station and switch	To select a scanned station and switch
To select a station on a different waveband:	off Preset Scan:	off the Radio Scan function:
• Press NEXT as often as necessary un-	• Press SCA or the rocker switch briefly.	• Press SCA or the rocker switch briefly.
til the desired memory bank appears
and then select the station by pressing
ST1 - ST6.

ENGLISH DEUTSCH

Scanning stored stations with Preset Scan

You can have all of the stored stations briefly scanned on all wavebands and in the se- lected FM memory bank.

Scanning stations with Radio Scan

ITALIANO FRANÇAIS

Preset Scan cannot be started unless PTY	You can also scan all of the stations within
is switched off (“PTY” is not highlighted in	reception range.
the display).	Radio Scan cannot be started unless PTY
If necessary, switch off PTY on menu level	is switched off (“PTY” is not highlighted in
2. To do so	the display).
• press TU and switch off the function by	If necessary, switch off PTY on menu level
pressing the corresponding key.	2. To do so
To start Preset Scan:	• press TU and switch off the function by
• Press SCA for approx. 1 second.	pressing the corresponding key.

NEDERLANDS SVENSKA

All of the stored stations on the waveband	To start the Scan function:
selected and within reception range will be	• Press SCA briefly.	If “lo” does not light up, the radio will also
scanned one after the other. “SCAN” and	All of the stations on the waveband select-	pick up weaker, more distant stations (high
the station name or frequency will flash al-	ed and within reception range will be	sensitivity).
ternately in the display.	scanned one after the other. “SCAN” and	If you want to alter the sensitivity level,
	the station name or frequency will flash al-	please refer to the section on “DSC program-
	ternately in the display.	ming - LO/DX”).

ESPAÑOL PORTUGUÊS

57