Blaupunkt Understanding the KeyCard System for Your Car Stereo

KeyCard theft protection system

This car radio comes equipped with one KeyCard, but it can also be operated with a second card.

If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer.

If you use two KeyCards, the settings stored on the first card will be transmitted to the second. However, you can individually store the following functions:

Preset button assignments, bass, treble, balance and fader settings, Loudness, TA (traffic announcement volume), beep vol- ume, LOW-EQ, HIGH-EQ.

In addition, the settings activated before the radio is switched off, such as the waveband, station, TA priority, AF, REG ON/OFF, SCANTIME, seek tuning sensitivity, ON VOL and SHARX will also remained stored.

This ensures that you will find your basic settings re-adjusted automatically as soon as you have inserted your KeyCard.

Putting the unit into operation

•Turn on the set with ON.

To insert the KeyCard, unlock the operating panel by

•pressing 1, the operating panel will fold down.

• Insert the KeyCard with the contacts	Removing the KeyCard
facing down as shown in the illustra-	To unlock the operating panel:
tion (arrow 1).
	• Press 1, the operating panel will fold
	down forwards.
	• Push the card in to the right as far as
	possible and remove it to the front.
2	• Push the operating panel back into po-
	sition.
1	For safety’s sake, the operating
3
	panel must remain locked when
• Push the card in the direction of the ar-	the vehicle is in motion.
row (2) and lock the operating panel	When you leave the vehicle, un-
back into position (arrow 3).	lock the panel and remove the
The car radio is now ready for operation.	KeyCard to protect the equipment
	against theft.
If a wrong KeyCard is inserted, then “CARD
ERR” will appear in the display.	“Training” a second KeyCard/
The system will switch off after approximate-
	Replacing a KeyCard
ly ten seconds.
If another card type is inserted (e.g. phone	When the unit is in operation with the first
	KeyCard, you can “train” a second one to
or credit card), the display will show
“WRONG KC” for approximately two sec- be also used with the set.
onds.	If you want to “train” a second KeyCard:
Remove the wrong card and insert the cor-	• Insert the first KeyCard and turn on the
rect KeyCard.	set.

• Press ON to turn on the set.	• Press the DSC button and press	/
	to select “LEARN KC”.
	• Press << or >>.
	The display will switch to “CHANGE”.

50