ENGLISH
AUTOMATIC TAPE SELECTION
This Stereo Cassette Deck contains an automatic tape selector which automatically selects the optimum bias and equalization for the tape in use. This is accomplished by detection of the tape type detections holes in the cassette housing.
•If a tape without tape type detection holes is used, the deck will be set for normal tapes.
Detection holes for metal tape
Detection holes for chrome tape
PLAYBACK
•Switch on your amplifier or receiver.
•Set the Tape Monitor switch on your amplifier or receiver to the TAPE position.
•The numbers in the illustration below depict the order in which operation steps are carried out.
PRECISION AUDIO COMPONENT/CASSETTE TAPE DECK
EJECT
5
TIMER
REC OFF PLAY.
dB
L
R
‚¤‚‚
REMOTE SENSOR
DOLBY NR B OFF C
|
| INPUT LEVEL |
|
| 5 |
| 4 | 6 |
RESET | 3 | 7 |
COUNTER |
|
|
MEMORY | 2 | 8 |
MPX | 1 | 9 |
|
REV.MODE
0 | 10 |
AUTO REVERSE
¢ON £OFF
PLAY
2 STOP | 3 REC PAUSE |
DIRECTION | REC/REC MUTE |
| CD SYNCHRO REC |
PHONE LEVEL | BIAS FINE |
|
| BALANCE | |
PHONES |
|
|
|
|
|
MIN | MAX | - | + | LEFT | RIGHT |
qPress the Power Operation switch to the ¢ ON position.
wPress the Eject button (EJECT 5 ) to open the cassette compartment cover.
eLoad the cassette tape and close the cassette compartment cover.
rWhen listening to a tape that has been recorded with Dolby noise reduction, set the Dolby NR switch (DOLBY NR) to match the system used at the time of recording.
DOLBY NR
B OFF C
tPress the Direction button ( 0 1 ) to select the direction of tape transport.
Transport Direction | Indicator |
|
|
Forward |
|
|
|
Reverse |
|
|
|
8