ENGLISH
TIMER RECORDING/PLAYBACK
Timer recording/playback can be made using any audio timer available on the market.
Amplifier | Tuner |
|
| TUNER | PB REC | L | R | L |
|
| L | L | A |
| |
|
|
|
|
| SP |
|
| LINE | R | R | R | B |
|
|
|
|
|
|
| |
| OUT IN | L |
|
|
| |
L | L | L |
|
|
|
|
|
| R |
|
|
|
|
R | R | R |
|
|
|
|
LINE LINE |
|
|
|
| ||
| OUT IN | SYNCHRO |
|
|
|
|
Wall outlet
Timer |
|
AM |
|
Lch | Rch |
On timer recording/playback | Speaker System |
|
OUT PUT
L
R 
•Timer recording procedure
1.Make sure the connections are correct, especially the power supply connections.
2.Turn on the power switch of each appliance.
3.Tune the desired station on the tuner.
4.Load the tape for recording. (Make sure the erase prevention tab is not broken off; if it is, cover the hole with plastic tape).
5.Set the Dolby NR switch (DOLBY NR) to the appropriate position.
6.Make sure the Monitor switch to the SOURCE position.
7.Adjust the recording input level.
8.Set the starting position of the tape.
9.Set the Timer switch (TIMER) to the “REC” side.
TIMER
REC OFF PLAY
10.Set the audio timer to the desired time. The audio timer will turn the power supply on at the desired time.
※With the above procedures, timer controlled recording can be made.
When the preset time comes, the power is supplied and the FM broadcast can be recorded.
•Timer playback procedure
1.Make sure the connections are correct, especially the power supply connections.
2.Turn on the power switch of each appliance.
3.Load the
4.Set the Dolby NR switch (DOLBY NR) to the appropriate positions.
5.Set the Monitor switch of the Amplifier to the TAPE position.
6.Press the Play button (PLAY) and playback the tape; adjust the playback level.
Press the Stop button ( 2 STOP).
7.Set the Timer switch (TIMER) to the “PLAY” side.
TIMER
REC OFF PLAY
8.Set the audio timer to the desired time. The audio timer will turn the power supply on at the desired time.
※With the above procedures, timer playback can be accomplished.
When the preset time comes, the power is supplied and playback will start.
Notes:
•Please read the operating instructions for the timer before use.
•If the timer recording or playback is not desired, be sure to switch the Timer switch (TIMER) to “OFF”.
•When using timers that allow several “ON/OFF” operations, timer start functioning can continue an unlimited number of times until the tape in the machine is finished.
14
