Soleus Air SG-TTW-12HC manual Air Conditioner Featurescontinued, TIMER button, + button, Timer

Air Conditioner Features(continued)

Notice: This is a general use remote controller, it could be used for the air conditioners

with multifunction; For some function, which the model dosen't have, if press the

corresponding button on the remote controller that the unit will keep the original running status.

			TIMER
					TIMER button
				● By pressing this key under switch-off state,
					you may set the time for auto switch-on. The
					range of setting is 0.5 ~ 24 hours. The
					characters "T-ON" and "H" will flash for 5
					seconds. Within 5 seconds,you may make
				one press of this key to complete the setting
				and send the message.If the setting is valid,
				the set time will be displayed for 2 seconds
					before display of the temperature message.
					During flash, you may press "+" key to
Remote control					increase the value and press "-" key to decrease
					the value. The time will increase or decrease
					by 0.5 hours with each press of this key.
					If pressing "+" or "-" key continuously, the
					time value will change rapidly. The remote
					controller can increase the set time by 0.5
					hours every 0.25 seconds. After being
+					energized, the fault is no timer setting, and
					there is no display of "T-ON" or "H". Press
		+ button
					ON/OFF key to switch on the unit and cancel
					the auto switch-on.When the temperature
	● For presetting temperature increasing.
		Press this button,can set up the temperature,			display becomes constant, you may press
		when unit is on . Continuously press and			this key again to display the remaining set
		hold this button for more than 2 seconds,
					time. The time value, "T-On" and "H" will
		the corresponding contents will be
					display constantly for 2 seconds. After 2
		changed rapidly, until unpress the button
					seconds,the preset temperature will be
		then send the information,o C( o F) is disp-
		laying all along. In Auto mode, the temp-			displayed. Within these 2 seconds, you may
					press this key again to cancel the auto
		erature can not be set up, but operate this
		button can send the signal. Centigrade			switch-on and send the message.
		setting range :16-30; Fahrenheit scale		● By pressing this key under switch-on state,
		setting range 61-86.			you may set the time for auto switch-off.
					The method of setting as the same as for
-					auto switch-on.
		- button

●Presetting temperature can be decreased. Press this button, the temperature can be set up, continuously press this button and hold for two seconds, the relative contents can quickly change, until unhold

this button and send the order that the ℃ (oF) signal will be displayed all the time.

The temperature adjustment is unav- ailable under the Auto mode, but the order can be sent by if pressing this button.

8