GE RB787 warranty Operating the Self-Cleaning Oven, How to Set Delay Start of Cleaning, Easy Steps

How to Set Delay Start of Cleaning

Easy Steps:

1.Latch the door.

2.Turn the Oven Temperature Control knob to

AUTO SELF CLEAN.

3.Press the START TIME pad.

4.Press the HOUR and MIN. pads to set the time of day you want cleaning to start. The Self- Clean Cycle will automatically begin at the time you selected.

Delay Start is setting the oven control to start the clean cycle automatically at a later time than the present time of day.

For example: Let’s say it is 7:00 and you want the oven to begin self-cleaning at 9:00 after you’re finished in the kitchen. The oven is just soiled a normal amount so the normal Clean Time of 4 hours and 20 minutes is preferred.

1.Follow the directions in the Before a Clean Cycle section.

2.After closing the door,

slide the latch handle to the right as far as it will go.

Never force the latch handle. Forcing the handle will damage

the door lock mechanism.

3.Turn the Oven Temperature knob to the AUTO SELF CLEAN position.

4.Press the START TIME pad.

START

TIME

5.Press the HOUR pad until 9:00 appears in the display. The oven control is now set to start cleaning in 2 hours, at 9:00.

HOUR

The Self-Clean Cycle will be set to automatically begin at 9:00 and finish at 1:20.

6.Both the OVEN ON light and the AUTO SELF CLEAN light will flash when the Clean Time is finished. Slide the latch handle to the left as far as it will go, turn the Oven Temperature knob to OFF and open the door.

Never force the latch handle. Wait until the AUTO SELF CLEAN light flashes and the latch slides easily. Forcing the latch handle may damage the door lock.

(continued next page)

31

Operating the Self-Cleaning Oven