Denon DRM-555 Tape Counter and Memory Stop, Operation of the Tape Counter, Memory Stop Operation

ENGLISH

TAPE COUNTER AND MEMORY STOP

			RESET
dB -40 -30 -20 -10	-5 -3 -1	0 +1 +3 +5 +10
L			COUNTER
R			MEMORY
MPX	SYNC	MEMO
			MPX
REMOTE SENSOR		DOLBY NR	REV.MODE
		B OFF C

PLAY	2 STOP	3 REC PAUSE
	DIRECTION	REC/REC MUTE

PHONE LEVEL

PHONES

MIN MAX -

CD SYNCHRO REC

1)Operation of the Tape Counter

(1)Press the Counter Reset button (RESET) to reset the counter to “‚‚‚‚”.

(2)By using the Play, Fast Forward or Fast Rewind functions, the reading

of the counter will change to indicate index position.

•During recording and playback operations, the counter is useful for noting the location of existing programs or positions where recording is to be started.

•The reading of this counter does not correspond with that of any other deck.

2)MEMORY STOP Operation

(1) During recording or playback, the Memory Stop feature can be used to locate a particular point on the tape. Press the Counter Reset button (RESET) at the desired point.

(2) Then press the Counter Memory button (MEMORY), the MEMO indicator lights.

(3)When the Fast Rewind button ( 00 ) is pressed during forward tape

travel ( ), or the Fast Forward button ( 11 ) is pressed during

reverse tape travel ( ), the tape is rapidly rewound (or advanced)

until the counter indication of “‚‚‚‚” is reached.

•The Memory Stop feature will rewind or forward the tape to within –5

counts in the forward ( ) direction (from “‚‚‚‚” to “ ”) and

to within +5 counts in the reverse ( ) direction (from “‚‚‚‚” to “‚‚‚fi”). After this, several seconds are required for corrective operations.

Caution:

If the memory stop operation is performed after repeated fast-forwarding or rewinding, the tape may not stop at the proper position.

13