Outlaw Audio 1070 owner manual Video Recording Device, Video Device, Connecting Your Model, Audio

Owner’s Manual

Connecting Your Model 1070

Connecting Other Video Components to the Model 1070

AUDIO CONNECTION NOTE:
When making digital audio connections,
use either the Coaxial or
Optical connection, but not both.		Video Recording Device
For Coaxial connections, use either
COAX 1, 2 or 3. Likewise, Optical
connections OPT 1-3 are interchangeable.		AUDIO		VIDEO
You will configure the Model 1070 later	Analog	Digital
to use the specific input you have chosen.	PLAY OUT REC IN	PLAY OUT	REC IN	Composite S-Video

L				Coaxial			IN
R				Optical			OUT
VIDEO CONNECTION NOTE:
Your connection requirements will
vary according to your video gear’s
capabilities. In most cases, only one
type of video connection is required.
Make sure to use the connections that
correspond to the same video input. For
example, if you connect a component’s
composite or S-Video output to the Video 2	L	R	Coaxial	Optical		Y	PB	PR
inputs on the Model 1070, you must also
use the Component Video 2 inputs as well.	Analog		Digital		S-Video	Composite	Component		DVI Out
If a DVI (or HDMI) output is available,		AUDIO				VIDEO
connect it in place of the component
video outputs.

The Connection Record Chart on page 25 provides an easy way to determine which video connections are associated with a particular input.

Video Device

(DVD Player, Satellite Receiver, Cable Box, etc.)

Model 1070 7.1 Channel Surround Sound Receiver

19