Outlaw Audio 1070 TroubIeshooting, Troubleshootong, Symptom, Possible Cause, Solution Options

Owner’s Manual

Troubleshootong

TroubIeshooting

Your new Model 1070 is designed to provide years of trouble-free operation. However, the complexity of today’s sophisticated home theater systems means that you might encounter an occasional problem with your system involving the Model 1070.

Listed below are some of the more common issues you could encounter. For additional hints on using the Model 1070 or resolving problems we suggest that you look at the Model 1070 section of our website at www.outlawaudio.com, or enter the Model 1070 Section of our Outlaw Saloon. If your problem persists, please call us at 866-OUTLAWS (688-5297) or 866-OUTLAWA (688-5292).

Symptom Possible Cause Solution Options

Unit does not turn on when remote or	No AC Power
front panel buttons are pressed

Make certain AC power cord is plugged into a live outlet Make certain rear panel MAIN POWER switch is ON

No sound from digital audio source	Input not properly selected	Make certain the correct digital input is associated to the source
No DTS when a DVD is playing	Incorrect bitstream output from DVD player	Check the DVD player’s setup menus to make certain DTS output is selected
		Check the disc menu to make certain DTS is selected
No sound from rear surround speakers	Incorrect speaker configuration	Check Speaker Configuration menu to make certain that surround speakers are set to “small”
		or “large”
Intermittent buzzing in tuner	Interference from local sources	Move or relocate the antenna
		Move the antenna or unit away from computers, fluorescent or neon lights, or appliances
		with motors

Unit does not respond to remote commands

Low remote battery power	Change the batteries
Remote set to different device	Press the TNR button to make sure the remote is outputting 990 codes
Remote sensor is obscured	Make certain the front-panel remote sensor is not blocked or connect an external remote
	sensor

No sound from one or more channels	Poor connections	Check interconnects to the amplifier and connections from the amplifier to the speakers
	Incorrect surround mode	Check surround mode to make certain it provides output to all speakers
	Incorrect speaker configuration	Check Speaker Configuration menu to make certain all speakers are set to “small” or “large”

50

Outlaw Audio