Sanyo | 0047, 0104, 0240 |
|
|
Scott | 0184, 0121, 0043, 0045 |
|
|
Sears | 0037, 0042, 0000, 0035, 0047, 0104 |
|
|
Semp | 0045 |
|
|
Sharp | 0048 |
|
|
Shintom | 0072 |
|
|
Shogun | 0240 |
|
|
Singer | 0072 |
|
|
Sony | 0033, 0032, 0000, 0035, 0636, 1032 |
|
|
Sylvania | 0035, 0081, 0000, 0043 |
|
|
Symphonic | 0000 |
|
|
TMK | 0240 |
|
|
Teac | 0000 |
|
|
Technics | 0035, 0162 |
|
|
Teknika | 0000, 0035, 0037 |
|
|
Thomas | 0000 |
|
|
Tivo | 0618, 0636 |
|
|
Toshiba | 0045, 0043 |
|
|
Totevision | 0037, 0240 |
|
|
Unitech | 0240 |
|
|
Vector | 0045 |
|
|
Vector Research | 0038 |
|
|
Video Concepts | 0045 |
|
|
Videosonic | 0240 |
|
|
Wards | 0035, 0060, 0000, 0047, 0240, 0042, 0048, 0072, 0081, |
| 0149 |
|
|
White Westinghouse | 0072, 0278, 0209 |
|
|
0072, 0000, 0035 | |
|
|
Yamaha | 0038 |
|
|
Zenith | 0039, 0000, 0033, 0209, 0479 |
|
|
VIDEO ACCESSORIES |
|
|
|
Manufacturer/Brand | Setup Code Number |
|
|
Panasonic | 1120 |
|
|
Pioneer | 1010 |
|
|
Sensory Science | 1126 |
|
|
Sharp | 1010 |
|
|
Owner’s Manual
Care and Maintenance
Care and Maintenance
Cleaning
When the unit becomes dirty, wipe it with a clean, soft, dry cloth. If necessary, first wipe the surface with a soft cloth slightly dampened with mild soapy water, then with a fresh cloth dampened with clean water. Wipe dry immediately with a dry cloth. NEVER use benzene, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as they may damage the finish of the metal parts. Avoid spraying insecticide, waxes, polishing agents, or any aerosol product near the unit.
When You Are Away
If you will not be using your home theater system for an extended period of time, it is always a good idea to turn the unit off using the MAIN POWER button on the rear panel of the Model 1070. This will prevent the automatic turn on circuits from accidentally turning the system on during your absence.
System Reset
In rare cases the Model 1070’s internal processor may freeze or
In most cases it is easy to solve this problem by simply unplugging the Model 1070 from its AC power source for about five minutes. After waiting, reconnect the power cord and turn the unit on. If the unit functions normally, no further action is needed.
In the event that the unit still does not operate properly, it may be necessary to manually reset the processor. Note, however, that when the processor is reset you will lose all settings including digital audio assignments, surround mode settings, speaker configurations, tuner presets and any other memory items. For this reason we strongly recommend that you record these settings on the chart provided on page 25 of this manual so that it is easy to restore them after resetting the processor.
To perform a system reset:
1.Turn the
2.Turn on the Model 1070 by pressing any of the input source buttons.
3.Press the Menu and Mute buttons on the front panel at the same time.
“PRESS (1) TO LOAD DEFAULT” appears in the
4.Release the the Menu and Mute buttons.
5.Within five seconds, press the 1 button on the remote control.
“OUTLAW AUDIO/MODEL 1070” appears briefly to indicate that the unit has been reset. The unit will then return to normal operation.
Model 1070 7.1 Channel Surround Sound Receiver
49
