NOTE
•When selecting “Periodic”, network camera logs in to FTP server automatically a minute before the scheduled recording starts. When the scheduled recording stops, there may be some unsent image data left in the camera. The camera will not log out from the FTP server until all images have been transferred.
•When not selecting “Periodic,” network camera logs in/out automatically each time an alarm goes off.
When there is more than one alarm at a time (receiving another alarm(s) while transferring a file), the camera logs out from the server after transferring last image data.
●Connection to FTP Enable:
Select one of the following recordable images on an FTP server:
•Periodic (periodic recording by schedule) (➝ page 46)
•Motion Detection (recording by motion detection) (➝ page 48)
•OFF (not to record on an FTP server)
You need to set up the configuration for the item you selected. For setup details on each item, refer to the section on the next page and after.
Click the “Save Settings” button below the setting.
Installation/Set up and OperationViewing
Recording
Setting up
Others
45
