Installation/Set up and OperationViewing
Recording
Setting up
Others
Before Calling Service Personnel... (Cont.)
Symptom | Cause | How to Manage | |
|
|
| |
No images are | ●The iris of your lens is | ●Adjust the iris of your lens properly. | |
displayed. | not adjusted properly. |
| |
|
|
| |
| ●Any of the cables are not | ●Connect the cable properly. | |
| connected properly. |
| |
|
|
| |
The colors of | ●The video monitor is not | ●Adjust the video monitor properly. | |
images are poor. | adjusted properly. |
| |
|
|
| |
| ●Lightings are dim. | ●Brighten the lightings. | |
|
|
| |
Cannot display | ●The Internet line is busy. | ●Wait for a little while. Sometimes it takes time to display | |
images from the |
| images. | |
network camera. |
|
| |
●There are not enough | ●There are the recommended requirements of PC to | ||
| |||
| resources (CPU power, | view the images of the network camera. | |
| RAM). | (→ page 20) | |
|
| ●Close all applications other than the network camera | |
|
| browser. | |
|
|
| |
Renewal speed | ●Picture size is too large. | ●The default setting of picture size is QVGA(320x240). | |
of network |
| To increase the speed, select a small image size in | |
camera images |
| “Resolution” of “Camera Window.” | |
is too slow. |
|
| |
|
| ||
(Part 1) | ●Picture quality is too | ●When you lower the image quality in “Quality” of | |
| high. | “Camera Window,” the renewal speed becomes faster; | |
|
| however, the picture quality becomes poor. | |
|
|
| |
Renewal speed | ●More than one users are | ●When many users access to the camera at the same | |
of network | accessing the camera at | time, the renewal speed of the image becomes slow. | |
camera images | the same time. |
| |
is too slow. |
|
| |
(Part 2) |
|
| |
|
|
| |
The network | ●Installed the camera in | ●Make sure that the camera is installed in right way. | |
camera images | wrong way. | Adjust the setting to place the “Toshiba” logo in the | |
are reversed in |
| right direction. | |
|
| ||
|
|
|
86
