Manuals / Toshiba / Photography / Digital Camera

Toshiba IK-WR01A operation manual Connecting to a Video Monitor

Models: IK-WR01A

1 94

Download 94 pages 31.8 Kb

Page 14

Installation/Set up

Connecting to a Video Monitor

Connecting to a Video Monitor

You can view camera images on the video monitor.

Video Monitor

and OperationViewing

LAN cable

Either

AC24V or DC12V

Rear

PoE

Recording

•On the power supply, use a PoE compatible hub, or connect AC24V or DC12V power plug.

24V AC UL Listed Class 2 power supply / 12V DC power supply

CAUTION : Never input AC/DC and PoE at the same time. It may cause a malfunction of the camera. Ensure that the PoE/POWER SELECT switch is properly set before inputting power.

In case of DC12V, connect “+12” to red cable and “GND” to black cable.

Setting up

Others

14

Do not overload power supply

Since this camera uses 24V AC UL Listed Class 2 power supply or 12V DC power supply, it should be connected to a power supply that allows for at least 5w consumption. Because the IK-WR01A uses a mechanism, a sufficient power supply with adequate current specifications is required.

Important

●Power plugs of connected equipment must be disconnected before installation.

●A 75-ohm coaxial cable (3C-2V or 5C-2V) is required for standard connection.

●For details of wiring and operation of equipment to be connected, refer to their operation manuals.

●Coaxial cables for video signals, LAN cable and the power cord are not supplied with the camera.

●Do not connect AC24V and DC12V at the same time. It may cause a malfunction of the camera or AC adapter.

●Use a 4 pair twisted cable for the LAN cable to connect the camera to a PoE compatible hub.

●Use IEEE802.3af-compliant PoE devices.

●An AC adapter is not supplied with the network camera. When using an AC adapter, a 10 watt or greater AC adapter is required.

●The camera takes about 30 seconds to start after the power is turned on.

Image 14

Toshiba IK-WR01A operation manual Connecting to a Video Monitor

Contents

Model IK-WR01A Important Safety Instructions Introduction Introduction Viewing and OperationLine Lock Phase ADJ Names and Features of PartsMode Setting Switch Lens Iris ADJ Monitor Out ConnectorVideo Out Jack Ethernet PortInstallation/Setup Installation Adjust the Angle of ViewTilt rotation Installation Installing the Camera Unit Recording Setting up46 mm Dome replacement Change of Dome CoverConnecting to a Video Monitor Connecting to a Video MonitorWhen power is supplied from a PoE compatible hub, etc About the Power Select SwitchWhen power is supplied from an AC24V or DC12V power source Video Switcher CAMERA1 Line-Lock controlLine Lock Phase Back Light Compensation Adjusting a LensMode Setting Switch Auto White Balance AWB Setting Up the Network Camera Environment Requirements for Network Camera Monitoring SystemEntering an IP Address Manually About the IP AddressObtaining an IP address automatically from the Dhcp server Structure of Connection Connecting Connect a LAN cable and then turn the power on Set the IP address of the personal computerUsing Camera Finder to Search for a Camera Click the camera you want to login from the list of camerasSetting up Camera Finder Click the User button Click Exit button to close Camera FinderChanging Administrator Login ID and Password Click Admin on the left side of the screenClick the Change button Click the browserSetting up Access Restriction Click User on the left side of the screenClick the Set/Change button Configuring the Network Manually Click Network on the left side of the screenSelect Manually Click the Save buttonInstallation/Set up Viewing and Operation Close the browser to log off disconnect the camera ViewingViewing Images Menu that is displayed when right-clicking on the image Camera Window ScreenAdjusting Images on the Camera OperationViewing Adding Images Viewing Logs Click View log on the left side of the Camera Window screenOperationViewing Recording Recordable Media Recordable Contents About Recording ImagesRecording Images on FTP Server Click FTP client on the left side of the screenConfigure each setting items FTP General SettingsClick the Save Settings button below the setting Connection to FTP EnableConfigure recording schedule Periodic FTP by ScheduleEnter File Name FTP by Motion Detection Configure settings for viewing FTP status File Transfer Order Setting up Recording Click Image RecordingRecording Images on a Personal Computer Click the Start buttonClick Save Current Picture As Specify the destination folder and file nameRecording Setting up How to Set up Configure each itemChanging the camera name System SettingsClick System on the left side of the screen Changing the time using an NTP server setting Setting up a format to display date/timeSetting the color of date/time display Adjusting the date and timeImporting the Settings Saved on a Personal Computer Rebooting the network cameraClick Export current configurations Updating the FirmwareUser Settings Displaying the screen asking a user name and passwordStoring the user name and password Deleting a user nameAdmin Settings Changing the Administrator ID and password Restarting the cameraAlarm Settings Click Alarm on the left side of the screenSetting the motion detection Setting the motion detectionNetwork Settings Configuring the connectionFramerate Control Configuring the Http port numberDNS update to DNS 1/2 Server Mail Settings Click Mail on the left side of the screenConfigure each item FTP Client Settings For details, refer to Recording Images on FTP Server →Ddns Settings Click Ddns on the left side of the screenUpdating the Firmware Before StartingClick Upload button on the screen shown in Step Click Firmware updateClick the Browse button Click Export current configurations Specify the destination and then save the fileSelect the file on settings you saved Click Import on the screen shown in StepSetting up Others Safety Precautions3 Index GlossaryJpeg Up and OperationViewing Display of Logs Recording Setting up Before Calling Service Personnel Before Calling Service Personnel... Guide of your broadband routerSymptom Cause How to Manage Cannot perform Lost the power RAM Sometimes primary is described as master Symptom Cause How to Manage Recorded Others Specifications IK-WR01AAppearance Diagram 150 Bracket Mounting BaseToshiba America Information SYSTEMS. INC