Xerox 5750 manual NDS Setup

22-22 Setting up the DocuColor

Network Setup

Service Setup

PServer Setup

NDS Setup

Before entering NDS settings, be sure the DocuColor is connected to the network and you have already configured an NDS directory tree with a Printer, a Print Server, and one or more Print Queue objects for DocuColor jobs (see page 3-4). To perform NDS Setup you may need permission to browse the NDS tree. If access to the Print Server is restricted, you’ll need a login password.

The main objective of NDS Setup is to specify the Print Server object. In addition, you can indicate the location of the DocuColor print queues.

Note that the terms NetWare server, Novell server, and IPX server are in common use and are used here interchangeably to mean the server on an IPX network running Novell NetWare networking software.

Enable NDS

No/Yes [No]

Select Yes if the NetWare servers you will use to print to the DocuColor are running

NetWare 4.x in native mode.

Select NDS Tree [List of trees]

Use the arrow keys to browse the list of NDS trees available to the DocuColor. Choose OK when you have displayed the tree that contains the Printer, Print Server, and print queue objects you have previously defined for the DocuColor.

Your new NDS tree selection automatically overwrites any previous tree selection. If you change the NDS tree selection and there are also current Bindery settings, you are alerted that they will be deleted. If you continue with NDS Setup, you can replace Bindery settings afterwards. To exit NDS Setup, choose Cancel or choose No in the confirmation screen.