Xerox 5750 manual Back view of the DocuColor

11-13 Ethernet cable connection

Back view of the DocuColor

Centronics-type parallel connector

AUI connector for thinnet and thicknet

RJ-45 connector for twisted pair Ethernet

Serial port

SCSI connector for external CD-ROM drive

Slot for 100BaseT option Copier connector slot

Slots for Token Ring option

Power switch

!Shut down the DocuColor before connecting it to any network device.

NOTE: Do not attach the cable to more than one Ethernet connector on the DocuColor at one time.

If the Token Ring option is installed, you can attach an unshielded twisted pair cable to the RJ-45 connector on the Token Ring board and attach a second cable to the RJ-45 Ethernet connector. For more information on Token Ring, see Appendix A.

TO USE THINNET CABLE:

1.With the DocuColor turned off, connect the transceiver to the AUI connector on the back of the DocuColor. Press down on the latch to lock the transceiver connection.

2.Connect the thinnet cable to the BNC connector on the transceiver.

3.Configure network servers for printing and then proceed to Setup.