Xerox 5750 manual 44-4, After this Setup screen, This message, Means

44-4	Administering the DocuColor
After this Setup screen:	This message:	Means:
Frame Type selection	Can’t detect Token Ring	DocuColor queries the Token Ring hardware. Error
(Network Protocol Setup/	hardware.	indicates that some components are not installed, are not
IPX/SPX Setup)	Token Ring hardware	installed correctly, or not installed in the correct device. An
	not installed or	unsupported Token Ring board may be in use. Check with
	not functioning.	your authorized service/support center.
	Invalid frame size.	The network hub is not connected to a Novell machine
		when the DocuColor tries to bind.
	Warning! IPX network	No other IPX machine can be found on the network, or
	number is zero.	the network hub is not connected to the network, when
		the DocuColor tries to bind. When this occurs, the
		network number defaults to zero.
Token Ring Setup	Can’t autodetect the ring	The DocuColor is trying to detect the current ring speed,
	speed. No device on ring.	but it is the only machine on the Token Ring network.
		Connect another machine to the Token Ring network first,
		before connecting the DocuColor.
Frame Type selection	Invalid frame size.	The network hub is not connected to a Novell machine
(Network Protocol Setup>		when the DocuColor tries to bind.
IPX/SPX Setup)
	Warning! IPX network	No other IPX machine can be found on the network, or
	number is zero.	the network hub is not connected to the network, when
		the DocuColor tries to bind. When this occurs, the
		network number defaults to zero.
Enable NDS	No NDS trees found.	No NDS trees were found on the Novell network. Check
(Network Service		that IPX frame types are properly set.
Setup>PServer Setup>NDS
Setup)