22-10 Setting up the DocuColor
If the Token Ring option is installed, you have these additional options:
For this Network or | Use this Port Setup: | Use this Protocol Setup: | Use this Service Setup: | ||
Connection Type: | |||||
|
|
| |||
|
|
|
|
| |
TCP/IP over Token Ring | Token Ring Setup | TCP/IP Setup: Token Ring Setup | LPD Setup | ||
|
|
|
| Web Services Setup | |
|
|
|
| Windows Setup | |
|
|
|
|
| |
IPX/SPX over Token Ring | Token Ring Setup | IPX/SPX Setup | PServer Setup (NDS, | ||
|
|
|
| Bindery, or both) | |
|
|
|
|
| |
|
|
|
|
|
TO ACCESS NETWORK SETUP OPTIONS:
1.Confirm that the network cable is connected to the DocuColor.
During Network Setup, the DocuColor queries the network for zones, servers, and
2.Choose Network Setup from the main Setup menu.
3.Choose Port Setup.
4.To use Ethernet, choose Ethernet Setup from the Port Setup menu, and enter the appropriate settings.
5.If the Token Ring option is installed, choose Token Ring Setup and enter the appropri- ate settings.
6.To print to the parallel port, choose Parallel Port Setup from the Port Setup menu, and enter the appropriate settings.
7.When you have finished entering port settings, choose Exit Port Setup and then choose Protocol Setup.
8.Enter the appropriate settings for the protocol or protocols you will use.
9.When you have finished entering protocol settings, choose Exit Protocol Setup and then choose Service Setup.
10.Enter the appropriate settings for the services you will use.
The options are described in detail in the following pages.