Xerox 5750 manual IPX/SPX installations, TCP/IP installations

AA-3 Token Ring Network Option

TO CONNECT UTP (UNSHIELDED TWISTED PAIR) CABLE TO THE DOCUCOLOR:

•With the DocuColor turned off, connect RJ-45 cable from the Token Ring MAU to the RJ-45 socket on the Token Ring card.

Configure the NetWare, Windows NT, or UNIX server to print to the DocuColor (see the next two sections) Then proceed to page 2-2 for DocuColor Setup.

TO CONNECT STP (SHIELDED TWISTED PAIR) CABLE TO THE DOCUCOLOR:

•With the DocuColor turned off, connect STP cable from the Token Ring MAU to the DB-9 STP connector on the Token Ring card.

Configure the NetWare, Windows NT, or UNIX server to print to the DocuColor (see the next two sections). Then, proceed to page 2-2 for DocuColor Setup.

IPX/SPX installations

If your network uses IPX/SPX protocols with Token Ring, configure at least one printer, a DocuColor Print Server and a DocuColor Print Queue on the NetWare server as described in “Configuring a NetWare server for printing” on page 3-4. You can configure up to eight bindery servers and one NDS tree connection to the DocuColor. This total is the same whether the DocuColor is connected by Token Ring, by Ethernet, or by both. For more information, see “Setting up an NDS connection” on page 3-6.

TCP/IP installations

If your network uses TCP/IP protocols with Token Ring, configure a printer and a DocuColor queue on a Windows NT server (see “Configuring a Windows NT server to support the DocuColor” on page 3-19), or on a UNIX server (see “Setting up the DocuColor on TCP/IP networks” on page 3-31).