Xerox 5750 manual Bindery Setup options, Bindery Setup menu, 22-26Setting up the DocuColor

22-26 Setting up the DocuColor

Bindery Setup options

Network Setup

Service Setup

PServer Setup

Bindery Setup

Exit Bindery Setup

Add File Server

View Server List

Edit Connection

Bindery Setup

Remove File Server

Bindery Setup

Use Bindery Setup if you have already configured one or more bindery servers (file servers running NetWare 3.12 or NetWare 4.x in bindery emulation) with a Print Server and a Print Queue for DocuColor jobs (see page 3-6). Before entering bindery settings, be sure the DocuColor is connected to the network and the NetWare file server is running. You’ll need a login name, and, if access to the file server or print server is restricted, you’ll need a login password.

NOTE: The terms NetWare server, Novell server, and IPX file server are in common use and are used here interchangeably to mean the server on an IPX network running Novell NetWare networking software.

Bindery Setup menu

Because you can set up more than one Novell server to handle DocuColor print jobs, an additional menu is displayed for this purpose. The options are:

•Add File Server—creates a new file server connection to the DocuColor. You can set up a maximum of eight file server connections. After you have finished adding a new server, you return to the Bindery Setup menu, and you can set up another server if you wish.

•View Server List—displays the list of file servers that have already been selected to communicate with the DocuColor.

•Edit Connection—lets you change the NetWare Print Server that will print to the DocuColor.

•Remove File Server—lets you disconnect the DocuColor from a file server to which it is currently connected. Remove a file server when you want to reduce the number of connections to the DocuColor or re-assign the connection to a different NetWare file server.

•Exit Bindery Setup—after you added all servers, viewed a list of file servers, or removed a file server from the list.