TO ACTIVATE THE BINDERY CONTEXT:
1.If you cannot reboot the NetWare server at this point, type the set command manually at the server’s colon prompt.
Use the same command as you entered in the AUTOEXEC.NCF file (in step 6 of the previ- ous procedure).
2.If you can reboot the NetWare server, the set command is loaded automatically.
You are ready to set up the DocuColor print server and print queue. See the next sec- tion for details.
Setting up a DocuColor print queue for bindery
For NetWare 3.12 and for 4.x in emulation, the NetWare print server and print queue for DocuColor are created and configured from NetWare Print Console (PCONSOLE), a NetWare utility that is stored in NetWare’s PUBLIC directory.
As with NDS, first you create several NetWare entities on a Novell server, then you select them in Network Setup on the DocuColor Control Panel.
TO SET UP A NETWARE SERVER FOR PRINTING TO THE DOCUCOLOR:
1.Log in to the NetWare server as the Supervisor.
2.At the NetWare
If you are using NetWare 4.x in bindery mode, Print Console (PCONSOLE) has two modes. Press the F4 key to switch to Bindery mode.
The Available Options menu is displayed.
3.Choose Change Current File Server and press Enter.
