NOTE: If you change your mind about any of the menus you have selected, you can use the Menu button to escape and return to the main Bindery Setup menu. To cancel all changes you must exit Network Setup.
.
Network Setup
Service Setup
PServer Setup
Bindery Setup
Add File Server
This option gives you two ways to add a Novell NetWare file server.
Select File Server
From List/Search Name
You may select the file server from a scrollable list, or by a name search. Choose From List if your network doesn’t have a large number of file servers. Select Search Name if the number of file servers is so large that scrolling through the list would take a long time.
If you selected From List: | If you selected Search Name: |
Add Server
[list of all servers]
The DocuColor obtains a list of NetWare file servers by querying the IPX network. Use the up and down arrows to select a NetWare file server from the list. Choose the server on which you have configured a print server and print queue to handle DocuColor print jobs.
Enter First Letters of Server Name
Use the up and down arrows on the arrow button to enter the first letters of the name of the file server you want to use, and choose OK.
Add Server
[list of servers matching the search]
This option is displayed if you entered letters to search. Scroll to select the server you want from the list.
Once you have chosen a file server, the DocuColor immediately tries to log in as a guest without a password. If it succeeds, it skips to the NetWare Print Server option.
If you try to add a file server but all DocuColor connections are already being used, you are prompted to remove a file server (see “Remove File Server” on page
