Xerox 5750 manual IPX/SPX Setup options

22-18 Setting up the DocuColor

Exit Protocol Setup

TCP/IP Setup

IPX/SPX Setup

Protocol Setup

Exit IPX/SPX Setup

Select Frame Types

Clear Frame Types

IPX/SPX Setup

Exit IPX/SPX Setup

Ethernet 802.2 *

Ethernet 802.3

Ethernet II

IPX/SPX Setup

IPX/SPX Setup options

To configure the DocuColor for IPX/SPX protocols, choose IPX/SPX Setup from the Protocol Setup menu.

Select Frame Types

Choose Select Frame Types. You must choose at least one frame type to enable IPX/SPX protocols. The DocuColor supports the following frame types for IPX/SPX:

•for Ethernet—Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP

•for Token Ring—Token Ring and Token Ring SNAP

The frame selection screen allows you to make multiple selections. Depending on your Port Setup selection, only Ethernet frame types, only Token Ring frame types, or all frame types are displayed. Press the line selection button beside each frame type used on your IPX/SPX network. An asterisk (*) appears beside each selected frame type. (Press the line selection button again to deselect a frame type.) Use the arrow keys to scroll to additional frame types. The DocuColor binds to each frame type as you select it.

When you have selected all the frame types used, choose Exit IPX/SPX Setup.

Clear Frame Types

If you selected several frame types by mistake, you can clear them all at once by choosing Exit IPX/SPX Setup, then choosing IPX/SPX Setup and selecting Clear Frame Types.

For protocols other than IPX/SPX, the frame type is automatically enabled and does not require setup, as follows:

With this protocol:	And these printing services:	This frame type is
		automatically enabled:
TCP/IP with Ethernet	LPD (Line Printer Daemon)	Ethernet II
TCP/IP with Token Ring	LPD (Line Printer Daemon)	Token Ring SNAP