Gateway Installation and Support Guide
4
Running the 2Wire Setup Wizard Manually
If after one minute the Setup Wizard does not automatically run:
Windows Users: Double-click the My Computer icon located on the desktop.
Double-click the icon that corresponds to your CD-ROM drive.
Double-click Setup.exe and follow the on-screen instructions.
Mac Users: Double-click the 2Wire icon.
Double-click the 2Wire Setup Wizard icon.
Verifying That Your PC Adapter Driver is Installed Correctly
There are two common errors that may occur during installation that will result in an error message:
• The appropriate adapter driver software was not installed.
• The adapter driver software was only partially installed or is incompatible with your system.
Follow the procedure appropriate to your system to determine whether the driver was correctly installed.
Windows XP: 1. Click Start and click Control Panel.
2. Double-click the System icon.
3. Select the Hardware tab, then click Device Manager.
Continue to step 4 under Accessing Driver Status on page 5.
Windows 2000: 1. Click Start >Settings and click Control Panel.
2. Double-click the System icon.
3. Select the Hardware tab and click Device Manager.
Continue to Step 4 under Accessing Driver Status on page 5.
Windows 98 SE or Windows ME:
1. Click Start >Settings and click Control Panel.
2. Click the System icon.
3. Select the Device Manager tab.
Continue to Step 4 under Accessing Driver Status on page 5.