Nortel Networks 1000BASE-ZX, 1000BASE-SX manual Configuration File Download/Upload screen fields

Chapter 3 Using the console interface 171

Table 40 describes the Configuration File Download/Upload screen fields.

Table 40 Configuration File Download/Upload screen fields

Field	Description
Configuration Image	The file name you have chosen for the configuration file. Choose a
Filename	meaningful file name that will allow you to identify the file for retrieval when
	required. The file must already exist on your TFTP server and must be read/
	write enabled.
	Default Value	Zero-length string
	Range	An ASCII string of up to 30 printable characters
TFTP Server IP Address	The IP address of your TFTP load host.
	Default Value	0.0.0.0 (no IP address assigned)
	Range	Four-octet dotted-decimal notation, where each octet is
		represented as a decimal value, separated by a decimal
		point
Copy Configuration	Specifies whether to copy the presently configured switch/stack parameters to
Image to Server	the specified TFTP server (default is No).
	Use the spacebar to toggle the selection to Yes.
	Press [Enter] to initiate the process.
	Default Value	No
	Range	Yes, No
Retrieve Configuration
	Specifies whether to retrieve the stored switch/stack configuration parameters
Image from Server	from the specified TFTP server (default is No). If you choose Yes, the
	download process begins immediately and, when completed, causes the
	switch/stack to reset with the new configuration parameters.
	Use the spacebar to toggle the selection to Yes.
	Press [Enter] to initiate the process.
	Default Value	No
	Range	Yes, No

Using the BayStack 420 10/100/1000 Switch