Nortel Networks 1000BASE-ZX, 1000BASE-SX, 1000ASE-XD, 1000BASE-LX manual Port list syntax

Chapter 3 Using the console interface 115

Figure 51 MAC Address Security Port Lists screen

Table 18 describes the MAC Address Security Port Lists screen fields.

Table 18 MAC Address Security Port Lists screen fields

Field

Entry

Port List

Description

This field indicates the port list number (S1 to S32) that corresponds to the values you set in the Port List field.

This field allows you to create a port list that you can use as an “Allowed Source” in the MAC Address Security Table screen.

Port list syntax

When you enter a port list in a stack configuration, you must specify either a unit/ port list, NONE, or ALL. In a stack configuration, ALL indicates all of the stack port; whereas, in a standalone scenario, ALL indicates all of the switch ports.

Note: NONE and ALL must be entered in uppercase characters as shown in the screen prompt.

Using the BayStack 420 10/100/1000 Switch