132Chapter 3 Using the console interface
Figure 60 High Speed Flow Control Configuration
Table 25 describes the High Speed Flow Control Configuration screen fields.
Table 25 High Speed Flow Control Configuration screen fields
Field | Description |
|
|
| |
Unit | Allows you to select the unit number (when stacking is configured) to view or | |
| configure. To view or configure another unit, type its unit number and press | |
| [Enter], or press the spacebar to toggle the unit numbers (the system only | |
| displays a screen for units that are configured with a Gigabit MDA). | |
|
| |
Autonegotiation | When enabled, the port only advertises support for 1000 Mb/s operation, in | |
| ||
| Default Value | Enabled |
| Range | Enabled, Disabled |
|
| |
Flow Control | Allows you to control traffic and avoid congestion on the Gigabit MDA port. Two | |
| modes are available (see “Choosing a high speed flow control mode,” next, for | |
| details about the two modes). The Flow Control field cannot be configured | |
| unless you set the Autonegotiation field value to Disabled. | |
| Default Value | Disabled |
| Range | Disabled, Symmetric, Asymmetric |
|
|
|
