Nortel Networks 1000BASE-LX, 1000BASE-SX, 1000ASE-XD manual Using the console interface, 209418-A

102Chapter 3 Using the console interface

Table 12 System Characteristics screen fields (continued)

Field	Description
Reset Count	A read-only field that indicates the number of resets since the operational firmware
	was first loaded on the switch.
	Default Value	1
	Range	0 to 232 -1 (4,294,967,295)
Last Reset Type	A read-only field that indicates the last type of reset.
	Default Value	Power Cycle
	Range	Power Cycle, Software Download, Management Reset,
		Management Factory Reset
Power Status	A read-only field that indicates the current power source (primary, RPSU, or both).
	Default Value	Primary Power
	Range	Primary Power, Redundant Power, Primary and Redundant
		Power
Local GBIC Type	A read-only field that indicates the GBIC type that is configured in this unit.
sysDescr	A read-only field that specifies hardware and software versions.
sysObjectID	A read-only field that provides a unique identification of the switch, which contains
	the vendor’s private enterprise number.
sysUpTime	A read-only field that shows the length of time since the last reset. Note that this field
	is updated when the screen is redisplayed.
sysServices	A read-only field that indicates the switch’s physical and data link layer functionality.
sysContact	The name and phone number of the person responsible for the switch.
	Default Value	Zero-length string
	Range	Any ASCII string of up to 56 printable characters1
sysName	A name that uniquely identifies the switch.
	Default Value	Zero-length string
	Range	Any ASCII string of up to 56 printable characters1
sysLocation	The physical location of the switch.
	Default Value	Zero-length string
	Range	Any ASCII string of up to 56 printable characters

1Although this field can be set to up to 255 characters from a Network Management Station (NMS), only 56 characters are displayed on the console terminal.

209418-A